Car port conversion...

[scared?]

Wall units are pretty damn efficient these days fatso...

[Don Carlos]

Coming from this place it's almost a compliment, congratz on putting up 1 side to a shed

[SplEEb]

Just one more comment. I have never seen trim around windows and doors applied over the siding, is the rest of the house done this way. Usually the trim is applied first which would need to be thicker than a 1x. Its usually a 5/4 piece. then the siding buts into it. Then you don't have big ass holes behind the trims.
The piece your going to apply to the door for the trim we call a "Jamb extension". The correct procedure would be to set the door flush to the substrate then apply a 5/4 trim, then siding butts into the trim. All you hadda do was ask, I'm here all day. lol

[YourGrandpa]

He say's the rest of the house is trimmed differently.

[YourGrandpa]

Wall units are pretty damn efficient these days fatso...

But a window/wall unit will always look trashy. Your choice.

[scared?]

Just one more comment. I have never seen...

Listen up dumbo...your circle of experience does not equate to a larger reality...got it?...

[scared?]

But a window/wall unit will always look trashy. Your choice.

Actually unless u get ceiling cassettes with ductless it's looks equally trashy. But I'm telling u that the set up is perfect for a wall unit. It will not be seen from outside at all and will be tucked away in corner if room...

[Tsakali]

there are some very nice wall units that don't even have to go on a window, all they need is a small opening on the wall.... they are nice is shape, wide, short and thin. We had one of those for over 20 years in greece, surely the american morons have something comparable by now, look around a little.

[SplEEb]

Just one more comment. I have never seen...

Listen up dumbo...your circle of experience does not equate to a larger reality...got it?...

whoa, calm down noob. My circle of experience is reality.
Your putting something together that a pro like myself will look at say "obviously done by the homeowner"
So Fuck you, I was just trying to help you not look like some complete amature. Got it Housewife...

[SplEEb]

He say's the rest of the house is trimmed differently.

Um, he was talking about mitre to square butts, not what I was talking about, try to keep up old man.

[YourGrandpa]

I know what you're talking about and have seen what he's done. I think we both agree that at this point it doesn't look right. Which is the reason I asked for pictures when it's complete. Maybe he'll build custom trim that sits inside and overlaps the siding. Then fill in the gaps between the overlapping trim and siding with some kind of putty/sealant? Although it would have been much easier to do as you suggested. If he's smart he'll get himself a skill saw, set it to the depth of the siding and cut in his trim.

[scared?]

Listen fags...it's done both ways around this region...the house was built 43 years ago and has been renovated 3 or 4 times and is now 3 times the original size. The siding butts up to trim in a few place and trim is on top in others. I was actually gonna do it y'all's way at first but my moron father in law who has built a number of houses suggested trim on top..it's trim on top now get over it homos...

[Tsakali]

trim should always be on top...it's meant to cover up imperfections in the work...lol @ morons who think it's a cosmetic option.

If you can do impeccable work , then no need for old fashioned trim. if i could I wouldn't even put anything between my floor tiling and the wall sheetrock...For example I don't have any faggot crown molding where the wall and ceiling connect, cause those are easy points to get right.

[scared?]

Still need to trim door...This is how I roll. If ya don't like it, blow me...got it?...

[HM-PuFFNSTuFF]

i guess i'll blow you

[scared?]

Mmmmmmmmmmmmmmmm....

[SplEEb]

trim should always be on top...it's meant to cover up imperfections in the work...lol @ morons who think it's a cosmetic option.

If you can do impeccable work , then no need for old fashioned trim. if i could I wouldn't even put anything between my floor tiling and the wall sheetrock...For example I don't have any faggot crown molding where the wall and ceiling connect, cause those are easy points to get right.

My sarcasm meter is almost redlineing, but just in case your serious: "UNINFORMED DUMBASS ALERT"
Fact: poor people can't afford crown molding, but say they don't like it to hide the fact they are POOR.

[SplEEb]

I know what you're talking about and have seen what he's done. I think we both agree that at this point it doesn't look right. Which is the reason I asked for pictures when it's complete. Maybe he'll build custom trim that sits inside and overlaps the siding. Then fill in the gaps between the overlapping trim and siding with some kind of putty/sealant? Although it would have been much easier to do as you suggested. If he's smart he'll get himself a skill saw, set it to the depth of the siding and cut in his trim.

In for the close up pics of the massive caulk job. lol

Listen fags...it's done both ways around this region...the house was built 43 years ago and has been renovated 3 or 4 times and is now 3 times the original size. The siding butts up to trim in a few place and trim is on top in others. I was actually gonna do it y'all's way at first but my moron father in law who has built a number of houses suggested trim on top..it's trim on top now get over it homos...

I'm over it, 25 years construction experience and have never seen it done that way, carry on.
Make sure you get you father in law to help you caulk.
Btw, Gramps, you were right. Not sure if I missed this somewhere but here it is.

[scared?]

its a regional thing u nub...

u actually dont even need to caulk that shit...wow ur a fucking noob for not knowing this...

[YourGrandpa]

I want dudes to blow me

Can you take some closer shots. I'm interested/concerned how the trim finishes to the window... Did you do anything to complete the moisture barrier around the window? If not it will be a great place for the wood to rot, mold to grow and bugs to enter.

[scared?]

I want dudes to blow me

Can you take some closer shots.

FAGOT!...

[SplEEb]

its a regional thing u nub...

u actually dont even need to caulk that shit...wow ur a fucking noob for not knowing this...

Ok cupcake, I suppose I am a noob in the desert region. That would be trouble here in the tropics.
carry on fruity ass.

[scared?]

i fucked a guy like u once...

[Tsakali]

trim should always be on top...it's meant to cover up imperfections in the work...lol @ morons who think it's a cosmetic option.

If you can do impeccable work , then no need for old fashioned trim. if i could I wouldn't even put anything between my floor tiling and the wall sheetrock...For example I don't have any faggot crown molding where the wall and ceiling connect, cause those are easy points to get right.

My sarcasm meter is almost redlineing, but just in case your serious: "UNINFORMED DUMBASS ALERT"
Fact: poor people can't afford crown molding, but say they don't like it to hide the fact they are POOR.

lol, keep drinking that coolaid

[scared?]

You should, at the very least, look into doing some kind of pitched roof system. Those gravel roofs end up being a constant headache.

No shit...it rained for the first time in months and it's leaking...lol?...

Called a few roofing contractors already...oh well it's only money...

Still ain't gonna pitch it...