Page 1 of 1
i got a memory could not be read
Posted: Fri Nov 04, 2005 10:02 pm
by D'Artagnan
Yeah i get a memory could not be read 0x101c65c7
when i try to load a save game on quake 4 single player, whats wrong?
My specs;
K8N Neo2 Platinum
AMD ATHLON XP64 3500+ SOCKET 939
1024 MB DDR 400 MHZ DUAL KIT ( 2 X 512 MB ) OCZ
Leadtek 6800gt , 256 meg
Posted: Fri Nov 04, 2005 10:44 pm
by R00k
Which 2 slots do you have your memory in?
I had a problem with my mobo (same one) because I put the RAM in the first two slots (nearest the CPU). Once I switched them to the other slots, problems went away.
You may also have to play with the memory timings a little, but try that first.
Posted: Fri Nov 04, 2005 10:59 pm
by D'Artagnan
R00k wrote:Which 2 slots do you have your memory in?
I had a problem with my mobo (same one) because I put the RAM in the first two slots (nearest the CPU). Once I switched them to the other slots, problems went away.
You may also have to play with the memory timings a little, but try that first.
There are on the 2 first slot near the cpu like you said, they say in my user guide to put it there since i wanna them to work on DUAL !!!
But the 3 and 4 slot are good too for DUAL MEMORY, i'm gonna try that first.
For the timming of the memory, i went on OCZ support and for my memory they say;
2.5-3-3-7 plus the voltage set to 2.6.
Posted: Mon Nov 07, 2005 2:04 am
by R00k
Did changing slots help then?
Posted: Mon Nov 07, 2005 2:42 am
by D'Artagnan
Funny, what i did was ;
i just put the first one to the second slot and the one that was on the second slot i put it at the first slot, just exchange slot...
Don't ask me why, but it run smoother and faster then ever...lol
plus the timming from the compagnie;
2.5-3-3-7
Posted: Mon Nov 07, 2005 4:44 am
by SOAPboy
dan1407 wrote:R00k wrote:Which 2 slots do you have your memory in?
I had a problem with my mobo (same one) because I put the RAM in the first two slots (nearest the CPU). Once I switched them to the other slots, problems went away.
You may also have to play with the memory timings a little, but try that first.
There are on the 2 first slot near the cpu like you said, they say in my user guide to put it there since i wanna them to work on DUAL !!!
But the 3 and 4 slot are good too for DUAL MEMORY, i'm gonna try that first.
For the timming of the memory, i went on OCZ support and for my memory they say;
2.5-3-3-7 plus the voltage set to 2.6.
Put it to flag 3s and change it to 8 so 3-3-3-8
my OCZ that i RMAed did the same fucking thing.. they sent wank ram. .:-|