In Game Commands.
Posted: Tue Sep 12, 2006 10:22 pm
What are some in game commands that can change my mouse sensitivity and maybe enhance my gameplay?
Page 1 of 1
Posted: Tue Sep 12, 2006 11:42 pm
Why? You mean cause youre getting banned with your current setup?
Posted: Wed Sep 13, 2006 7:48 am
Mondoman9630
You will find everything you need to know atUpSet Chaps Q3 guides.
There is also plenty of information in the sticky threads.
The mouse sensitivity command is simply "\sensitivity" you will either need to hire the setting if you current sensitivity is too low or lower it if it's too high. You should also take into a account if \cl_mouseaccel (mouse acceleration) is set to 1 (on) or 0 (off). Both these settings are also affected in part by your windows mouse sens and accel settings.
I can't give you specific values because everyones hardware/software/drivers are different so you will have to find a setting that suits you style of play.... and I'm afraid initially that does take some time if you are fussy like me
Good luck and shout if you have any more specific questions.
Regards
Fora.
You will find everything you need to know atUpSet Chaps Q3 guides.
There is also plenty of information in the sticky threads.
The mouse sensitivity command is simply "\sensitivity" you will either need to hire the setting if you current sensitivity is too low or lower it if it's too high. You should also take into a account if \cl_mouseaccel (mouse acceleration) is set to 1 (on) or 0 (off). Both these settings are also affected in part by your windows mouse sens and accel settings.
I can't give you specific values because everyones hardware/software/drivers are different so you will have to find a setting that suits you style of play.... and I'm afraid initially that does take some time if you are fussy like me
Good luck and shout if you have any more specific questions.
Regards
Fora.
Posted: Wed Sep 13, 2006 8:09 am
yeah, another useful one is /m_yaw .0333 (.022 default)
/m_yaw affects the side to side but not up and down.
/m_pitch affects up and down.
i use:
/sensitivity 3
/cl_mouseaccel .2
/m_yaw .03333
works great for me.
EDITED
/m_yaw affects the side to side but not up and down.
/m_pitch affects up and down.
i use:
/sensitivity 3
/cl_mouseaccel .2
/m_yaw .03333
works great for me.
EDITED
Posted: Wed Sep 13, 2006 6:37 pm
Negative... So that i can better enjoy my gameplay.dzjepp wrote:Why? You mean cause youre getting banned with your current setup?
Posted: Wed Sep 13, 2006 6:38 pm
Foralarx and Bas1c, Thanks I'll try that.
Posted: Wed Sep 13, 2006 9:10 pm
I talk a bit about fine tuning sensitivity and acceleration in this post:
http://www.quake3world.com/forum/viewto ... 679#268679
http://www.quake3world.com/forum/viewto ... 679#268679
Posted: Wed Sep 13, 2006 11:55 pm
.Bas1c wrote:yeah, another useful one is /m_yaw .333 (.22 default)
/m_yaw affects the side to side but not up and down.
/m_pitch affects up and down.
i use:
/sensitivity 3
/cl_mouseaccel .2
/m_yaw .3333
works great for me.
uhh you mean .03333? yaw/pitch default is .022.
Posted: Thu Sep 14, 2006 8:15 am
Thank you for that correction. The settings are working great for me thank you.