Overclock AMD 2600+ barton software?

[AmIdYfReAk]

no, dont raise the AGP... that will cause some posable complecations down the line....

btw, did you get a nice little boost? :icon32:

[Guest]

Post timedemo demo four in quake3 before and after please.

[reefsurfer]

no, dont raise the AGP... that will cause some posable complecations down the line....

btw, did you get a nice little boost? :icon32:

Ok, no touching the AGP.

Yepp, got one hell of a boost i must say.
Joint ops is running at 45-75 frames all the time(yes in big firefights aswell) and before the OC it was running between 18-35 frames.

thx for all the help... cunts.

[AmIdYfReAk]

ahh, thats not that bad...

your Add'd FSB is def giving a little more to the videocard..

[Tormentius]

Thats quite a nice boost. What are your temps sitting at under load? Have you run Prime95 as Magestic suggested yet?

[ajerara]

All that on a 350 watt power supply? What brand is it? Must be a good one. Looks like a pretty nice OC you have going. All your readings look good.

[axbaby]

that's better then i ever could stable and my system is watercooled.
182 was my limit as well with 200mhz ram and amd3000 166mhz cpu 1:1

187 windows stable with ram running slightly lower then 1:1 but quake3 would eventually crash.

my best boost was cpu 171mhz and ram at 200mhz+ "around that" and very weird ram timings.

wish i had the link "nvidia motherboard forum" where they fully tested all ram settings and had some surprises that worked" . weird ram timings that didn't make sense but WOW they worked great.

[YourGrandpa]

I had my P4 3 GHz HT O.C.'d to 3.2 GHz with factory cooling. I probably could have got a little more out of it too if I tinkered with it longer.

[AmIdYfReAk]

cmon gramps, 200mhz? i havent seen that low sence i was o/cin my Cel 500... :S

[YourGrandpa]

:icon31: