Quake 3 Server, not showing up on the master server list

[ilumos]

Right,
I've fired up the ol' Q3 server again, and connecting to it is no problem, from the outside world or from the local network.
The problem is that it doesn't show up in any server browsers, e.g. ASE or the built in browser.
The PC running the server is DMZ'd, and runs a software firewall. I've configured the rules as following:
Allow 27960 TCP/UDP Incoming & Outgoing
Allow 27950 TCP/UDP Incoming & Outgoing

I'm running dedicated "2" and my master server variables are below:
sv_master2 "master3.idsoftware.com"
sv_master3 "master0.gamespy.com"
sv_master4 "master.quake3arena.com"

When the server starts and runs it resolves the names to IP addresses and reports itself presumably, but still it doesn't show up.

Any ideas?

Thanks,

ilumos

[4days]

as far as i know, server browsers won't report a server coming from the same address as the browser.

[ilumos]

Ah, OK. Can someone do me a favour then and check if the server called "ilumos Standard 1v1" pretty please?

Thanks loads,

ilumos

[4days]

just connected to it after searching for 'ilumos Standard 1v1' in ase no probs.

[ilumos]

Excellent, thanks loads :icon25: