Page 1 of 1
Little question about multiple displays.
Posted: Mon Jan 30, 2006 12:38 pm
by Deji
Okay, so I have a Club3D 9800Pro (CGA-P988TVD). The card has a normal monitor connector, a DVI(-I?) connector and a TV-Out. I also have a DVI to normal monitor adapter.
Question as follows: can I run a dual display setup and will I be able to duplicate one of the 2 main displays onto the TV, essentially having 3 displays with the ATI drivers?
Posted: Mon Jan 30, 2006 12:43 pm
by Foo
No. The 9000 series only supports 2 outputs at any one time.
I know this to be true of the 9000 itself, you may be lucky with the 9800 as it's newer. Also, it might be possible with those tweaked omega drivers or such, I've not tried them (and don't run ATI on this PC)
Posted: Mon Jan 30, 2006 4:41 pm
by Guest
I ran 3 displays off an 8500LE with Catalyst Control Panel. I had the main desktop on my monitor and a duplicated extension on the two other displays.
Posted: Tue Jan 31, 2006 2:51 am
by AmIdYfReAk
i would need to agree with toxic, i have ran my 19" CRT, and a 17" CRT with the TV cloning the 17" CRT ( 2nd display )
i tryed it on the Old control pannel, not the new one.. so i wouldent know where to start.
btw, i am running a authentic ATI 9800 pro
Posted: Tue Jan 31, 2006 3:25 am
by YourGrandpa
I'd have to say that ATI is shit without its control panel.