new cams
Re: new cams
Beastly. What size wheel/tire you running? I've got 245/265 on 18s but I'd like to run 19s and bump the back up to maybe 295.
Re: new cams
275/40/18 on 18x10 in the rear, 255/45/18 on 18x9 in the front but realistically I should run the 275's up front on the 18x9, and a 325 on the 18x10. but hey these tires came premounted and they work fine, handle great!
http://farm3.static.flickr.com/2620/387 ... ddd6_b.jpg
http://farm3.static.flickr.com/2592/387 ... 4fc7_b.jpg
http://farm3.static.flickr.com/2567/387 ... 3e0b_b.jpg
http://farm3.static.flickr.com/2620/387 ... ddd6_b.jpg
http://farm3.static.flickr.com/2592/387 ... 4fc7_b.jpg
http://farm3.static.flickr.com/2567/387 ... 3e0b_b.jpg
-
- Posts: 153
- Joined: Tue Mar 08, 2005 4:29 am
Re: new cams
If that's at the wheels then cool! good times!andyman wrote:It made 509hp

What's under the bonnet? What were the cam specs?
Re: new cams
engine is a 4.6L 3v, stock shortblock and heads except for the cams, springs, retainers and phaser limiters. It has a procharger stage II D1sc blower on it making 9.5psi at 6300rpm.
very dirty in this picture:

The cams are comp cams stage II blower psr cams
very dirty in this picture:

The cams are comp cams stage II blower psr cams
Re: new cams
I love the lope of high rev cams at idle
braaap braaap braaap
braaap braaap braaap
-
- Posts: 6926
- Joined: Thu Feb 10, 2000 8:00 am
Re: new cams
Why didn't the shop give you a higher idle?
Re: new cams
works fine at 760rpmAmIdYfReAk wrote:Why didn't the shop give you a higher idle?

I got to get a better mic to do some justice for how it sounds.
-
- Posts: 17509
- Joined: Thu Jan 01, 1970 12:00 am
Re: new cams
Nice work dude
Bet it is naughtily quick
Bet it is naughtily quick
-
- Posts: 17020
- Joined: Fri Dec 01, 2000 8:00 am
Re: new cams
I love that sound. *potato potato potato*
That car is a monster.
That car is a monster.
Re: new cams
whoa awesome engine tone!
nice one!
u prolly already treid this but just rubbing some plain soap from a bar onto the belt whilst rturning should stop the sqeak
nice one!
u prolly already treid this but just rubbing some plain soap from a bar onto the belt whilst rturning should stop the sqeak
it is about time!
Re: new cams
http://www.youtube.com/watch?v=JtgwklXTQAQ
i was just about to rev it when the mem card ran out of space!!!!!!
i was just about to rev it when the mem card ran out of space!!!!!!
-
- Posts: 2103
- Joined: Tue Feb 22, 2005 6:22 pm
Re: new cams
Siiiiiick. When you gonna post the quarter mile times? 

Re: new cams
October 17th is the next track rental and I registered already so I'm gaurunteed a spotDeathshroud wrote:Siiiiiick. When you gonna post the quarter mile times?

-
- Posts: 2103
- Joined: Tue Feb 22, 2005 6:22 pm
Re: new cams
Wouldn't be suprised if you made it into the 12's, thats if you can launch it without spinning the tires all day.
Re: new cams
I had a LOL there two......xer0s wrote:It's not pink, it's white!
Awesome soundThey love me...... Maybe not...

[color=#FFBF00]Physicist [/color][color=#FF4000]of[/color] [color=#0000FF]Q3W[/color]
Re: new cams
I was running 12's on all motorDeathshroud wrote:Wouldn't be suprised if you made it into the 12's, thats if you can launch it without spinning the tires all day.

-
- Posts: 17509
- Joined: Thu Jan 01, 1970 12:00 am
Re: new cams
Sounds really fucking evil actually dude... 

-
- Posts: 2103
- Joined: Tue Feb 22, 2005 6:22 pm
Re: new cams
TBH, I'm suprised you tranny and motor can handle that much power without any extra work done to them. Grats man.
Re: new cams
I need to get a friend to tape me. This is the best one I can find of the exhaust I'm running.
http://www.youtube.com/watch?v=Ls5zTV_gyb0&fmt=18
So far the best sweet-spot I've found is 100+ mph in fourth gear. Sound is just incredible. I think that might be slow enough that the wind wouldn't fuck up the mic too.
http://www.youtube.com/watch?v=Ls5zTV_gyb0&fmt=18
So far the best sweet-spot I've found is 100+ mph in fourth gear. Sound is just incredible. I think that might be slow enough that the wind wouldn't fuck up the mic too.
-
- Posts: 6926
- Joined: Thu Feb 10, 2000 8:00 am
Re: new cams
tisk, tisk, givin it beans when the motor is cold....