Page 1 of 2
new cams
Posted: Fri Oct 02, 2009 2:07 am
by andyman
http://www.youtube.com/watch?v=_8sjfStL0no
http://www.youtube.com/watch?v=3WYLIFfbFtM
the sheer awesomeness of this car now is way off the charts. It made 509hp, 419tq on the dyno today.
Re: new cams
Posted: Fri Oct 02, 2009 2:30 am
by bitWISE
Beastly. What size wheel/tire you running? I've got 245/265 on 18s but I'd like to run 19s and bump the back up to maybe 295.
Re: new cams
Posted: Fri Oct 02, 2009 2:49 am
by andyman
275/40/18 on 18x10 in the rear, 255/45/18 on 18x9 in the front but realistically I should run the 275's up front on the 18x9, and a 325 on the 18x10. but hey these tires came premounted and they work fine, handle great!
http://farm3.static.flickr.com/2620/387 ... ddd6_b.jpg
http://farm3.static.flickr.com/2592/387 ... 4fc7_b.jpg
http://farm3.static.flickr.com/2567/387 ... 3e0b_b.jpg
Re: new cams
Posted: Fri Oct 02, 2009 3:12 am
by urgrund777
andyman wrote:It made 509hp
If that's at the wheels then cool! good times!

What's under the bonnet? What were the cam specs?
Re: new cams
Posted: Fri Oct 02, 2009 3:22 am
by andyman
engine is a 4.6L 3v, stock shortblock and heads except for the cams, springs, retainers and phaser limiters. It has a procharger stage II D1sc blower on it making 9.5psi at 6300rpm.
very dirty in this picture:
The cams are comp cams stage II blower psr cams
Re: new cams
Posted: Fri Oct 02, 2009 3:30 am
by AmIdYfReAk
thats cute.

Re: new cams
Posted: Fri Oct 02, 2009 3:52 am
by EtUL
I love the lope of high rev cams at idle
braaap braaap braaap
Re: new cams
Posted: Fri Oct 02, 2009 4:18 am
by AmIdYfReAk
Why didn't the shop give you a higher idle?
Re: new cams
Posted: Fri Oct 02, 2009 4:27 am
by andyman
AmIdYfReAk wrote:Why didn't the shop give you a higher idle?
works fine at 760rpm
I got to get a better mic to do some justice for how it sounds.
Re: new cams
Posted: Fri Oct 02, 2009 5:11 am
by GONNAFISTYA
Nice beast.

Re: new cams
Posted: Fri Oct 02, 2009 5:29 am
by Don Carlos
Nice work dude
Bet it is naughtily quick
Re: new cams
Posted: Fri Oct 02, 2009 1:52 pm
by Nightshade
I love that sound. *potato potato potato*
That car is a monster.
Re: new cams
Posted: Fri Oct 02, 2009 1:54 pm
by plained
whoa awesome engine tone!
nice one!
u prolly already treid this but just rubbing some plain soap from a bar onto the belt whilst rturning should stop the sqeak
Re: new cams
Posted: Fri Oct 02, 2009 3:15 pm
by xer0s
It's not pink, it's white!

Re: new cams
Posted: Fri Oct 02, 2009 10:04 pm
by andyman
http://www.youtube.com/watch?v=JtgwklXTQAQ
i was just about to rev it when the mem card ran out of space!!!!!!
Re: new cams
Posted: Sat Oct 03, 2009 4:39 am
by Deathshroud
Siiiiiick. When you gonna post the quarter mile times?

Re: new cams
Posted: Sat Oct 03, 2009 4:50 am
by andyman
Deathshroud wrote:Siiiiiick. When you gonna post the quarter mile times?

October 17th is the next track rental and I registered already so I'm gaurunteed a spot

The races will be at night and the air should be nice and cool, if the e.t.'s are as surprising as the last dyno numbers, then we are in for a .. um... surprise!
Re: new cams
Posted: Sat Oct 03, 2009 5:46 am
by Deathshroud
Wouldn't be suprised if you made it into the 12's, thats if you can launch it without spinning the tires all day.
Re: new cams
Posted: Sat Oct 03, 2009 7:46 am
by Whiskey 7
xer0s wrote:It's not pink, it's white!

I had a LOL there two......
They love me...... Maybe not...
Awesome sound

Re: new cams
Posted: Sat Oct 03, 2009 12:28 pm
by andyman
Deathshroud wrote:Wouldn't be suprised if you made it into the 12's, thats if you can launch it without spinning the tires all day.
I was running 12's on all motor

Re: new cams
Posted: Sun Oct 04, 2009 3:24 pm
by andyman
Re: new cams
Posted: Sun Oct 04, 2009 4:25 pm
by Don Carlos
Sounds really fucking evil actually dude...

Re: new cams
Posted: Sun Oct 04, 2009 4:51 pm
by Deathshroud
TBH, I'm suprised you tranny and motor can handle that much power without any extra work done to them. Grats man.
Re: new cams
Posted: Sun Oct 04, 2009 5:52 pm
by bitWISE
I need to get a friend to tape me. This is the best one I can find of the exhaust I'm running.
http://www.youtube.com/watch?v=Ls5zTV_gyb0&fmt=18
So far the best sweet-spot I've found is 100+ mph in fourth gear. Sound is just incredible. I think that might be slow enough that the wind wouldn't fuck up the mic too.
Re: new cams
Posted: Mon Oct 05, 2009 2:46 am
by AmIdYfReAk
tisk, tisk, givin it beans when the motor is cold....