Quake3World

What are the server settings?

Have you configured your firewall (be it a hardware or software one) properly? By default, Q3A needs incoming and outgoing traffic on UDP port 27960.

From: Tyrone Biggums
To: Survivor
Posted: 06-28-2005 06:52 PM
Subject: Created Servers
What do you mean by that?

There is a topic for this.
I suspect that you are c0eforty5 but prove me wrong and keep it here where everyone can help you.

Server settings like the settings used to start the server. Be it commandline or ingame settings.

From: Tyrone Biggums
To: Survivor
Posted: 06-28-2005 06:59 PM
Subject: Created Servers
Who is this c0eforty5 you speak of?

Keep it in the topic and give us some info to work with.

Server settings like the settings used to start the server. Be it commandline or ingame settings..... ?

Your AOL is the same as c0eforty5's.

I refer to http://quake3world.com/forum/viewtopic.php?t=6681

Unless you give the settings you use to start the server next post I will no longer even try to help you.

c0eforty5 is my brother lol. We share sn's.[/i]

Seek help elsewhere. I mean this for both the server and yourself.

Unless you give the settings you use to start the server huh?

Survivor you can't just give me a hand?[/u]

Can someone help me with this?

Survivor wrote:What are the server settings?

^misantropia^ wrote:Have you configured your firewall (be it a hardware or software one) properly? By default, Q3A needs incoming and outgoing traffic on UDP port 27960.

axbaby wrote:it may take awhile for it to show up in the master server list.

so long as they have your server ip and you setup the server right they simply can join by typing

/connect YOUR.SERVERS.IP.address

AmIdYfReAk wrote: Are you behind a router? in a network? wha tkind of internet connection do you have?

is joining another Server such a bad thing?

god damn kid. Understand that you prolly aren't going to get any help with this, if you have problems understanding why check out the other 4 threads you have made about this same questions... Answer/follow the above and come back with the answers you have been asked many times.

Have you configured your firewall (be it a hardware or software one) properly? By default, Q3A needs incoming and outgoing traffic on UDP port 27960. how the hell do i do that?

Originally posted by axbaby:
it may take awhile for it to show up in the master server list.

so long as they have your server ip and you setup the server right they simply can join by typing

/connect YOUR.SERVERS.IP.address

I did give them my IP and it did'nt work!

Are you behind a router? in a network? wha tkind of internet connection do you have?

Yes a wireless router. I don't know what you mean by network. I have Adelphia Cable.

Tyrone Biggums wrote:Have you configured your firewall (be it a hardware or software one) properly? By default, Q3A needs incoming and outgoing traffic on UDP port 27960. how the hell do i do that?

Check http://www.portforward.com/ for instructions on how to configure your router.

What do I do once I'm in the site?

Press F1

We could log into your router for you and fix the problem if you need us to, how does that sound?

Tyrone Biggums wrote:What do I do once I'm in the site?

*wearily shakes head*

^misantropia^ wrote:

Tyrone Biggums wrote:What do I do once I'm in the site?

*wearily shakes head*

Don't even try

ok one more try.

• What kinda of router do you have?
  When you look up at your wirless router and figure out the model#?
• When you figure out what router you have try and find it on the website.
• By reading the website if you look at the second paragraph on the HOME page.
• The 2nd paragraph starts with "The Routers section
• Do you see that Routers is actually a link.
• CLICK the word Routers and it takes you to another page with a list of routers they have tutorials on how to change settings on your router.
• Again find your router by the name of the manufacturer and model.
• Then I do hope you can figure out the rest from there?

One more thing.

One Private message from you and I won't bother replying to you anymore.

You need to reply in this thread to help yourself among other that might have the same question.
:icon25:

Open port 27960 on your damn router

Yeah Borke could you do that please? I'd really appreciate it man.

Tyrone, good questions man... :icon14: